BQPGD - OMNI-BOND ADHESIVE WITH MIXERS 43457 PART B

  • MSDS: BQPGD
  • Manufacturer: PREMIER INDUSTRIAL CORP
  • Product Name: OMNI-BOND ADHESIVE WITH MIXERS 43457 PART B
  • National Stock Number: 8040-00N012386
Product Identification

Product ID:OMNI-BOND ADHESIVE WITH MIXERS 43457 PART B
MSDS Date:09/27/1988
FSC:8040
NIIN:00N012386
MSDS Number: BQPGD

Responsible Party
PREMIER INDUSTRIAL CORPORATION
4500 EUCLID AVENUE
CLEVELAND, OH 44103
US

Emergency Phone: 216-391-8300

Info Phone: 216-391-8300

Cage: 18399

Contractor
PREMIER FARNELL CORPORATION
CLEVELAND, OH 44103-3736 US

Telephone: 216-391-8300

Cage: 18399

Ingredients

M-PHENYLENEBIS-METHYLAMINE (XYLENE DIAMINE). LD50 RAT ORAL

CAS: 1477-55-0

RTECS: PF8970000

Fraction By Weight: 3%

OSHA PEL 0.1 MG/M3 C, SKIN

ACGIH TLV: 0.1 MG/M3 C, SKIN


DIETHYLTOLUENE DIAMINE. LD50 RAT ORAL 485 MG/KG, RABBIT

CAS: 68479-98-1

Fraction By Weight: 4%

OSHA PEL N/K

ACGIH TLV: N/K


AROMATIC BISTHIODIAMINE. LD50 RAT ORAL 10000 MG/KG, RABBIT

CAS: 52411-33-3

Fraction By Weight: 10%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:LD50 EST RABBIT DERMAL 4666 MG/KG (MFR)
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EXCESSIVE OR CHRONIC EXPOSURE MAY
CAUSE LIVER DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: EYE IRRITATION. SKIN: IRRITATION.
INGESTION: MODERATELY TOXIC BY ORAL EXPOSURE. INHALATION: VERY
TOXIC.
Medical Cond Aggravated by Exposure:N/K

First Aid

First Aid:EYES: IMMEDIATELY FLUSH WITH PLENTY OF WATER FOR AT LEAST 15
MIN AND CALL A PHYSICIAN. SKIN: WASH WITH ISOPROPANOL AND THEN
PLENTY OF SOAP AND WATER. INGESTION: SEEK PHYSICIAN IMMEDIATELY,
SHOW MSDS O R LABEL. DO NOT INDUCE VOMITING. INHALATION: REMOVE TO
FRESH AIR, ADMINISTER OXYGEN AND CALL PHYSICIAN.

Fire Fighting

Flash Point:200F,94C
Lower Limits:0.9%
Upper Limits:9.5%
Extinguishing Media:EXTINGUISH WITH WATER, FOG, FOAM, DRY CHEMICAL,
CARBON DIOXIDE.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SELF-CONTAINED
BREATHING APPARATUS AND FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:CONTACT WITH FLAME, HOT SURFACE, MAY
PRODUCE TOXIC GASES. VERY TOXIC BY INHALATION.

Accidental Release

Spill Release Procedures:EVACUATE AREA, VENTILATE AREA, WEAR APPROVED
RESPIRATORY PROTECTION, WEAR SUITABLE PROTECTIVE CLOTHING, GLOVES
AND EYE/ FACE PROTECTION. CLEAN UP WITH ABSORBENT MATERIAL, CONTAIN
AND PICK UP WASTE MAT ERIAL, PUT IN SEALED APPROVED CONTAINER.
Neutralizing Agent:N/K

Handling

Handling and Storage Precautions:KEEP AWAY FROM HEAT AND FLAME. USE W/
ADEQ VENT. AVOID PROLONG BREATHING OF VAPS/SPRAY MIST, SKIN/EYE
CONTACT. DO NOT INGEST. KEEP CONTAINER CLOSED.
Other Precautions:FOR PROFESSIONAL & INDUSTRIAL USE ONLY.KEEP OUT OF
REACH OF CHILDREN.IN CASE OF ACCIDENT/ILLNESS,SEEK MD IMMED & SHOW
MSDS/ LABEL.ALWAYS READ & FOLLOW DIRECTIONS ON PROD LABEL.ADDNL
TECHNICAL DATA SHE ETS/MSDS ARE AVAIL FROM MFR ON REQUEST.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL & GENRL VENTILATION NECESSARY TO KEEP AIR
CONCENTRATION BELOW TLV .GENERAL AND LOCAL EXHAUST REQUIRED.
Protective Gloves:SOLVENT RESISTANT
Eye Protection:CHEM WORK GOGGLES. FULL LENGTH (SUP DAT)
Other Protective Equipment:WEAR SUITABLE PROTECTIVE CLOTHING.
Work Hygienic Practices:WASH THOROUGHLY AFTER USE.
Supplemental Safety and Health
ROUTES OF ENTRY: SKIN CONTACT, EYE (MANUFACTURER). EYE PROT: FACESHIELD
MAY BE ADDED TO GOGGLES .

Chemical Properties

HCC:T6
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:0.3
Spec Gravity:1.05,WATER=1
Evaporation Rate & Reference:NIL
Solubility in Water:NIL
Appearance and Odor:AMBER LIQUID WITH A MILD ODOR.
Percent Volatiles by Volume:>0.01

Stability

Stability Indicator/Materials to Avoid:YES
STRONG BASES, WATER, PEROXIDES.
Stability Condition to Avoid:HEAT, FLAME, AND MOISTURE.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
AMINES, PYROLYSIS PRODUCTS.
Conditions to Avoid Polymerization:KEEP AWAY FROM HEAT AND FLAME.

Disposal

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.